In collaboration with Whitfield Manufacturing. NY Drive has created a true masterpiece of a strut bar for the 3000GT and Stealth. The bar will work with all Mitsubishi 3000GTs and Dodge Stealths. We are proud to say this product is made in the USA

Better handling:

Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system operate more efficiently. You can feel the difference through improved turn-in, sharper steering response and greater steering feedback. This is done by utilizing the entire chasis and distributing the force across the bar

Everyday Driving:

It has minimal effect to ride comfort. Although it stiffens the chassis. It’s effects aren’t fully felt. Unless you driving really hard; particularly with turns and lateral movement. When going over pot holes or irregularities in the road. Upward force of compression would be distributed to the Un-effected side. Theoretically reducing the amount of force felt in the cabin. Another positive aspect of having this bar mounted is that with a stiffer chassis. It reduces creeks and squeaks. Being made of Aero tubing chromoly - and plates made in cold rolled steel. These are the strongest bars available.

Power:

Although it doesn’t increase power. It allows the car to deliver existing power to the ground more effectively. It will just feel different that stock. You are making the chassis stiffer resulting in a more directly feel. Consider stock vs solid motor mounts. With weak worn out rubber motor mounts. Power is lost with twisting and flexing and sent through the chasis. Where as solid motor mounts minimize the flexing and limits power loss.

The point of this product is keeping the tires on the ground. Specifically the point of contact with the surface. As you turn in aggressively into a turn or turns with a gradient. The tire opposite of the turn you are taking will want to lift there by reducing the amount of surface contact area with the road. With regards to efficiency. The power is more directly translated to the wheels. With the properties of stiffening chasis Increased responsiveness when turning. A stiffer chasis is just safer in general.

Asthetics:

In addition to the aforementioned benefits. The box has a laser cut hole to allow easier installation of the ground wire. The hole was designed to easily fit the stock ground wire but large enough to allow for additional wires if need be. Additionally, we designed a removable cover to provide a more finished look. The cover plate will be left in its raw form so it can be easily powder coated or painted. The cover will be secured with 2 included button screws. 3S owners all have a unique taste when it comes to customizing their cars. Knowing this as a fellow 3000GT owner and a member of the 3S community for over 20 years. The collective decision was made to leave the bar and cover in it’s raw form. Doing so will not only make it easier to start the customization process. It will help cut down costs of the bar.

Materials:

• Chromoly Aero 4130 Tubing

• Laser Cut Plates

• Cold rolled steel plates